Trigger

Bool

Notification node trigger. If a “1” is received at this input, the notification is sent to the output.

A fixed text for the title of the notification can be entered here.

Alternatively, the text for the title can also be received via the input as a 14-byte text by means of a KNX telegram or variable data point.

A fixed text for the content of the notification can be entered here.

Alternatively, the text for the content can also be received via the input as a 14-byte text by means of a KNX telegram or variable data point.

Controls Gira G1’s LED.
Selection from the following options:

-  Fixed LED colour

-  Single LED colour value

-  Input for each colour

Defines the colour for Gira G1’s LED.
There is a choice of red, green, yellow, blue, magenta, turquoise, and white.
“Off” means the LED is switched off.
“No change” means the LED’s status is not changed.

The colour of the LED can be controlled via the input. The following values are used:
0 - Black (Off)
1 - Red
2 - Green
3 - Yellow
4 - Blue
5 - Magenta
6 - Turquoise
7 - White

The LED’s colour can be determined using the three individually controllable inputs. The following values are used:

Gira G1’s screen can be switched on via the input.
If this input has a “1”, the screen will be switched on when the next message is received.

The time stamp can either be generated internally (by the Gira L1 or Gira X1) or received externally via the KNX bus.

This input can be used to receive the time stamp via a KNX telegram.

Use Reset

The logic node can be reset via the “Reset” input, which can be optionally activated.

If a “1” is received at this input, the logic node is reset.

If a notification is too long to be sent in a KNX telegram, long notifications can be sent in successive text fragments.
These text fragments are collected in the Gira G1 and then displayed next to each other.

This is where you set the time span that should be provided for collecting the text fragments.

Output

String

Forwards the text to the output node.

The format looks like this in the example:

{"Title": "Lift maintenance", "Body": "The lift in the staircase will be taken out of service for maintenance tomorrow between 9 am and 12 noon. If you have any questions, please call 01234 5678.", "Timestamp": "2020-02-12T09:23:00+02:00", "LED": 1}

Input

The current door communication status can be sent to the input via an 8-bit telegram.
The following values of this information represent the various statuses of the door communication system:

0 - Idle state
1 - Bus busy*
2 - Recall*
3 - Incoming door call
4 - Active door call
5 - Outgoing door call
9 - Incoming internal call
10 - Active internal call
11 - Outgoing internal call
12 - No connection
13 - Configuration active*
14 - Outgoing camera call
15 - Active camera call

*is not evaluated by the node

Idle state

Incoming door call

Outgoing door call

Active door call

Incoming internal call

Outgoing internal call

Active internal call

Outgoing camera call

Active camera call

No connection